Logwatch

redhat9な鯖をいまさら用意されたので、新しいLogwatch smartmontoolsを入れとこうってことでふと気づくとLogwatch 7.3.1に…
なにが変わったのかわからんが、7.3を7.3.1にしようとしたら本家落ちてたりorz

とりあえずChangesだけ

Version 7.3.5 -> 7.3.1 [stable]:
[Sep 15, 2006]

  • Numerous patches applied by Bjorn L and contributed by many, thanks!

Version 7.2 -> 7.2.1 [stable]:

  • Fixed missing HTML files in RPM

Version pre7.2 -> 7.2 [stable]:

  • html/encode code from Mike
  • Other misc bug fixes, enhancements, patches

Version 7.0 -> pre7.1 [beta]:

  • Custom local service filter scripts now supported.
  • Expanded duplicate detection of configuration

parameters.

  • Brought documentation up-to-date to reflect the

compliance with Filesystem Hierarchy Standard of
version 7.0, as well as the above two changes.
The logWatch man page, the README, and
HOWTO-Customize-LogWatch have been updated.
HOWTO-Make-Filter and HOWTO-Customize-Configuration
are no longer applicable.

  • New install_logwatch.sh script for those installing

directly from tar file (not installing with RPM).

  • New dnssec service filter.

Version pre7.0 -> 7.0 [stable]:
[unknown]

  • Final release with the new /etc/logwatch directory structure

Version 6.1.2 -> pre7.0 [beta]:
[unknown]

  • Numerous changes, most notably a whole new directory structure.

Version 6.1.1 -> 6.1.2 [stable]:
[unknown]

  • Fixed lock-up problem in http filter when using perl 5.6
  • Small improvements to clamav filter

Version 6.1 -> 6.1.1 [stable]:
[unknown]

  • More cleanup and more application of community patches. Thanks everybody,

especially Bjorn and Mike!

  • More cleanup and more application of community patches. Thanks everybody,

especilaly Bjorn!

Version pre6.1 -> 6.1 [stable]:
[unknown]

  • More cleanup and more application of community patches. Thanks everybody,

especilaly Bjorn!

Version 6.0.2 -> pre6.1 [beta]:
[unknown]

  • More changes by Bjorn
  • New services added: audit, sonicwall, and zz-network (must be enabled in logwatch.conf to make it active)
  • Added --numeric to inhibit certain DNS lookups
  • Significant improvements for the --range option (run --range help for info)
  • This release is courtesy of Bjorn

Version 6.0.1 -> 6.0.2 [stable]:
[unknown]

  • Build containing numerous bug fixes applied by Bjorn

Version 6.0 -> 6.0.1 [stable]:
[unknown]

  • Just applied a few small cleanup changes

Version pre6.0 -> 6.0 [stable]:
[unknown]

  • More consolidated patches from Mike Tremaine for final 6.0 release

Version 5.2.2 -> pre6.0 [beta]:
[unknown]

  • Once again, added consolidated patches from Mike Tremaine , since I can't seem to get them done!
  • Added filters for extreme-networks, saslauthd, and xntpd
  • Added tons of changes from a ton of people that Mike Tremaine

put together for me.

  • Added openvpn and netscreen filters
  • New HTML output
  • Better multi-platform support
  • Lots of other changes I'm sure that I missed

Version 5.2.1 -> 5.2.2 [stable]:
[unknown]

  • Added more patches from blues@ds.pg.gda.pl

Version 5.2 -> 5.2.1 [stable]:
[unknown]

  • Few minor bug fixes from 5.2

Version 5.1 -> 5.2 [stable]:
[unknown]

  • Added check for large user mailboxes
  • Added pop3 and imapd filters
  • Updated clamav support
  • New cisco log filter
  • Tons of updates to existing filters (too many to list!)

Version pre5.1 -> 5.1 [stable]:
[unknown]

  • More solaris support and filter enhancements

Version 5.0 -> pre5.1 [beta]:
[unknown]

  • More Solaris support
  • Tons of filter enhancements sent in by users
  • Added filters for shaperd, oidentd, and mailscanner (Solaris)
  • Tons of patches and new options of --splithosts and --multiemail
  • Added Yum and Clam-update filters
  • Couple of patches from blues@ds.pg.gda.pl

Version 4.3.2 -> pre5.0 [beta]:
[unknown]

  • Main script: couple of security fixes and many bug fixes
  • Basic Solaris support
  • Now there is a Logwatch.pm that the filters can use common code from
  • Improvements to numerous filters, especially sendmail
  • Added new filters; amavis, clamav-milter, courier, http, postfix, pound, pureftpd, vsftpd

Version 4.3.1 -> 4.3.2 [stable]:
[unknown]

  • Just applied numerous minor patches (most of them from Jim O'Halloran)

Version 4.3 -> 4.3.1 [stable]:
[unknown]

  • Fixed an error in the ftpd-messages script that I somehow missed

Version 4.2.1 -> 4.3 [stable]:
[unknown]

  • Numerous minor bug fixes and enhancements
  • Added RAID and drive failure notification
  • Added smartd service filter

Version pre4.3 -> 4.2.1 [stable]:
[unknown]

  • Fixed missing autorpm filter components

Version 4.1 -> 4.2 [stable]:
[unknown]

  • More improvments in the kernel script
  • Added support for AutoRPM log processing

Version 4.0.1 -> 4.1 [stable]:
[unknown]

  • Fixed IP lookup bug in kernel script
  • Sendmail improvements sent in from Alex K
  • Just some more cleanup as I wanted to get a new stable release out there
  • Fixed Perl warning in Pluto filter
  • applied some changes from Eric Gerbier for proftpd filter
  • Fixed formatting of Pluto filter
  • Removed use of /bin/date from all scripts (thanks Mark D. Nagel )
  • Added afpd service filter

Version 4.0 -> 4.0.1 [stable]:
[unknown]

  • Had to undo the foreign-language fixed in applystddate for sh-utils 2.0.12
  • Had to take the 'require 5.6.0' line out of sudo filter as Perl 5.8 complains


Version 3.3 -> pre4.0 [beta]:
[unknown]

  • Exim script will no longer cause errors if modules don't exist
  • Reworked the method of processing shared scripts
  • Added patches from RHL8.0 distribution of logwatch
  • Fixed all current Red Hat Bugzilla issues

(bugs 68243 73487 75086 68805 69605 68807 68862 72809)

  • Applied some wu-ftpd patches submitted by Jay Berkenbilt
  • Now Logwatch places service delimiters in the output file and service filters no longer need to
  • Double-quotes can be used to preserve case in configuration file values
  • General code cleanup
  • Can now process logs only from a specified host
  • Added a stunnel filter and new Pluto filter
  • Added ability to remove services by using '-servicename' in logwatch.conf
  • Fixed bug when using Perl 5.8
  • Added much better iptables support
  • Numerous other bug fixes

Version 3.2 -> 3.3 [stable]:
[unknown]

  • Fixes in iptables and sendmail parsing
  • Some Solaris compatibility changes
  • Added arpwatch filter

Version 3.1 -> pre3.2 [beta]:
[unknown]

  • Added basic iptables support
  • Added --logdir and --hostname command-line options
  • Numerous other bug fixes

Version pre3.1 -> 3.1 [stable]:
[unknown]

  • Fixed possible hanging problem in samba applydate
  • Fixed bug with cron filter not reporting any activity
  • Added ipop3d, portsentry, qmail and vpopmail contributed filters

Version 3.0 -> pre3.1 [beta]:
[unknown]

  • Samba filter actually works to some degree

Version pre3.0 -> 3.0 [stable]:
[unknown]

  • Hopefully now properly included the up2date filter!
  • Added simple/minimal dhcpd filter
  • Fixed fortune module so it works again

Version 2.9 -> pre3.0 [beta]:
[unknown]

  • Updated cron filter to handle newer cron daemons
  • Fixed up2date filter
  • Actually properly included the up2date filter
  • Added pam_unix filter

Version 2.8.5 -> 2.9 [stable]:
[unknown]

  • Cleaned up named, sshd, secure, and proftpd filters
  • Added Exim, up2date, and sudo filters

Version 2.8.2 -> 2.8.5 [stable]:
[unknown]

  • Added filter for syslog entries from the NetGear rt314 router(by Daniel J. Barrett )
  • Added an enhanced sendmail filter that also handles messages from the blackhole SPAM filter
  • Logwatch will now bypass any empty logfiles

Version 2.8.1 -> 2.8.2 [stable]:
[unknown]

  • Fixed bad pluto filter in last release

Version 2.8 -> 2.8.1 [stable]:
[unknown]

  • Added mktemp warning about -d switch if it fails
  • Added Pluto filter
  • Fixed bug with xferlog date processing
  • Removed some unmatched entries for pro-ftpd

Version 2.7 -> 2.8 [stable]:
[unknown]

  • Added in.qpopper filter
  • Added some more error checking
  • Cleaned up the cron and ftp filters

Version 2.6 -> 2.7 [stable]:
[unknown]

  • Supports multiple copies of the same command (such as *remove) in config files
  • No longer requires an = sign when no arguments are given
  • Added some more filtering
  • Added a $summarize_connections variable for the "secure" service

Version 2.5 -> 2.6 [stable]:
[unknown]

  • Now uses mktemp if available
  • Added some filters that were missing from the 2.5 release

Version 2.1.1 -> 2.5 [stable]:
[unknown]

  • Implemented several bug fixes and patches that have been sent in
  • Fixed a possible root exploit using a race condition in /tmp
  • Fixed bugs 46371, 56191, 58578, 61202, 61829, 61831, 61832 from bugzilla.redhat.com

redhat9 7.3に統一済み
Debian woody sarge(5.2.2) 6.1.2だったり